|
 |
About
us |
 |
| GRAPHITE GASKET |
| HENGSENG NO:HLG850,850E SERIES |
 |
 |
|
850 Series Graphite
gaskets are cut from pure graphite sheet or graphite sheet
with metal reinforcement, features excellent corrosion-resistance,
high-and-low temperature resistance, good compression resilient
and high internsity it can be used as sealing elements of
pipe, valve, pump, pressure vessel, heat exchanger and condenser,
etc. Other complex gaskets such as water gauge gasket and
flange gasket with bolt holes are available.
850E Series, it is improved 61 series,
wrapped with metallic stripe in the inner and outer circle
borderline. Keep the former excellent performances. Can
be installed and disassembled conveniently without damage.
Thickness : 1.5mm, 2.0mm, 3.0mm, 4.5mm |
|
| Application |
Flanges, valve bonnets, heat exchangers, level indicatiors
etc. |
| Typical Service Fluids |
High temperature & pressure steam, hot water,
gases, heat midium, hydrocarbon, organic so;vents, acids,
alkalis(PH0-14),LPG,LNG,liquefied oxgen, nitrogen and
hydrogen etc. |
|
|
| Type |
| NO. |
Name |
Constructuion |
Pressure
( Mpa ) |
Temperature( °C) |
| Redcing Atmosphere |
Oxidizing Atmosphere |
| HLG850 |
Pure graphite gasket |
 |
3 |
-240~1650 |
-240~400 |
| HLG851 |
Reinforced graphite gasket with punched metal |
5 |
-240~450 |
-10~450(CS)
-240~560(SS304) |
| HLG852 |
Reinforced graphite gasket with adhesive metal |
5 |
-240~450 |
-240~560(SS304)
-200~870(SS3.6) |
|
| |
|
|
| |
|
